This picture shows a LT500 with a outlaw pipe.
LT250 National Porting Package 85-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $525.00
Kit includes CT porting, re-chamber head, bore cylinder and piston kit. Work performed on your cylinder and head. Price does not include return freight.
|
|
CT has the Power You are Looking for. Our R&D program has lead to many championships with the LT motor. |
LT250 Complete Power Package 87-92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1195.00
Kit includes CT porting, re-chamber head, piston kit, top-end gasket set, Delta VForce reed cage, 38PWK carburetor, throttle cable, CT pipe/silencer. . Work performed on your cylinder and head. Price does not include return freight.
LT500 National Porting Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $545.00
KKit includes CT porting, re-chamber head, bore cylinder and piston kit. Work performed on your cylinder and head. Price does not include return freight.
87 model LT add $65.00 for heavy studs.
LT500 Complete Power Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $1,195.00
Kit includes CT porting, re-chamber head, piston kit, top-end gasket set, Delta VForce reed cage, 39PWK carburetor, throttle cable, CT pipe/silencer. The 87 model need heavy studs, if yours does not already have them add $65.00 for us to install them. Work performed on your cylinder and head. Price does not include return freight.
|
|
Multi time AMA National Hillclimb Champion |
|
|
Veronica Beach Race Winner | |
|
|
AMA Grand National Championship Winner |
|
Part # |
Description |
Price |
|
| Exhaust | |||
| PP-15M4-CH | LT250R MX Mid Range pipe & silencer chrome 87-90 |
$350.95 |
|
| PP-16M5-CH | LT250R MX Mid Range pipe & silencer chrome 91-92 |
$350.95 |
|
| PP-19M4-CH | LT500R MX Mid Range pipe & silencer chrome all |
$362.95 |
|
| PP-19R5-CH |
LT500R Outlaw pipe & silencer chrome all
years. The Outlaw pipe has the silencer pointing at the ground. The advantage to the outlaw (besides looking cool) is it uses significantly less stinger that it normally takes to mount the silencer on the back of the quad, along with a Shorty silencer it produces more HP and more Rev's. To run the Outlaw you can't run the factory front fender support and you need to run the stock Suzuki pipe hangers (pipe mounts).
|
$350.95 |
|
|
Engine components |
|||
| PI-534PS thru PI-534P8 | Wiseco piston LT250R 85-86 Std.-.080 (70mm-72mm) |
CALL |
|
| PI-571PS thru PI-571P8 | Wiseco piston LT250R 88-92 Std.-.080 (67mm-69mm) |
CALL |
|
| PI-561PS thru PI561P14 | Wiseco piston LT500R 87-90 Std.-.140 |
CALL |
|
| EC-10-101 | Top End Wrist Pin Bearing |
$10.95 |
|
| GA-C7070 | 85/86 SUZUKI LT 250R COMETIC TOP END GASKET SET | $31.49 | |
| GA-C7071 | 87/92 SUZUKI LT 250R COMETIC TOP END GASKET SET | $35.02 | |
| GA-C7072 | 1987 SUZUKI LT 500R COMETIC TOP END GASKET SET STD. BORE THROUGH 88MM | $35.02 | |
| GA-C7125 | 1987 SUZUKI LT 500R COMETIC TOP END GASKET SET 88.25MM BORE THROUGH 91MM | $35.02 | |
| GA-C7274 | 1988 - 1991 SUZUKI LT 500R COMETIC TOP END GASKET SET 86MM (STD.) BORE THROUGH 88MM | $35.02 | |
| GA-C7122 | 1988 - 1991 SUZUKI LT 500R COMETIC TOP END GASKET SET 88.25MM BORE THROUGH 91MM | $35.02 | |
| GA-C811822 | 1987 - 1992 SUZUKI LT 250R COMPLETE GASKET SET THIS WINDEROSA COMPLETE ENGINE GASKET SET ALSO INCLUDES ALL OF THE ENGINE OIL SEALS, CRANK, KICK START, COUNTERSHAFT, ETC. WINDEROSA GASKETS ARE AN EXTREMELY HIGH QUALITY US MADE GASKET SET. | $63.95 | |
| GA-C811823 | 1988 - 1991 SUZUKI LT 500R COMPLETE GASKET SET THIS WINDEROSA COMPLETE ENGINE GASKET SET ALSO INCLUDES ALL OF THE ENGINE OIL SEALS, CRANK, KICK START, COUNTERSHAFT, ETC. WINDEROSA GASKETS ARE AN EXTREMELY HIGH QUALITY US MADE GASKET SET. | $69.95 | |
| Carburetors | |||
| CB-019 | 38PWK Air Striker, Pre-jetted carb w / cable |
$249.95 |
|
| CB-022 | 39PWK pre-jetted carb w/cable |
$249.95 |
|
| CB-025 | 41PWK pre-jetted carb w/cable |
$279.95 |
|
| Cables | |||
| CA-T01-893 | Cable (thumb throttle to Keihin carb) LT250/500 |
$20.95 |
|
| CA-C04-057 | Clutch cable LT250 86-92 |
$11.90 |
|
| CA-C04-104 | Clutch cable LT500 87-90 |
$11.90 |
|
| Clutch | |||
| CL-HB061 | Hinson clutch basket LT250 87-92 |
$199.95 |
|
| CL-HB104 | Hinson clutch basket LT500 87-90 |
$215.00 |
|
| Reed Cage | |||
| RD-DVF250/500LT87 |
Delta V Force cage LT250 LT500 1987
This Delta VForce was just released ( yes 24 years later) for the 87 LT 250 and 500, and we have them in stock. Our in house Dyno testing has proven the Delta VForce reed cage to produce the most HP compared to every other reed cage on the market. We are as loyal to reed cages as 1/4 of a horsepower can make us, if we find something that makes more HP tomorrow we'd move to that, but I wouldn't hold my breath. |
$140.00 |
|
| RD-DVF250/500LT |
Delta V Force cage LT250/LT500 88-92 Our in house Dyno testing has proven the Delta VForce reed cage to produce the most HP compared to every other reed cage on the market. We are as loyal to reed cages as 1/4 of a horsepower can make us, if we find something that makes more HP tomorrow we'd move to that, but I wouldn't hold my breath. |
$140.00 |
|
| Controls | |||
| CH-FLX-QR1431-** |
Fasst 1-1/8" Flexx Bars
These are the best off road bars money can buy. Bars come with three different elastomers to get the proper cushioning for your type of riding along with a cross bar pad in your color choice of blue, grey, or red. A 1-1/8" bar mount kit is required. |
$329.95 |
 |
| CH-TG-CRHI |
Tag T-2 CR High Bend 1-1/8" Fat Bars with Bar Pad Bars are available in black or silver and bar pads are available in black, blue, or red. A 1-1/8" bar mount kit is required. |
$89.95 |
|
| CH-TG-UNMNT |
Tag Universal 1-1/8" Bar Mount Kit This is a clamp set than converts your stock 7/8" bar clamp to the 1-1/8" Fat Bar set up. Can be used with any brand 1-1/8" bars. |
$69.95 |
 |
| IG-KS | Pro Design Tether Kill Switch - Black, Blue, or Red | $36.95 |
|
| Order By Description | Power Madd Hand Guard Kit Kit includes hand guards and mount kit. Hand guards are available in blue/black, , silver/black, white/black, yellow/black, and blue/silver. |
$52.95 |
 |
This is not a secure website for online ordering. Phone or fax your order directly to us.
Ph. 562-945-2453 Fax. 562-945-2453
www.ctracing.com
